Wiring & diagram Info: fluorescent

Showing posts with label fluorescent. Show all posts

Tuesday, November 18, 2014

Fluorescent lamp lights starter

Why fluorescent lamp light blinking before long? Because Fluorescent light removes electrons and hit the wall of a glass tube coated with phosphors that emit light plastic. To throw a flow of electrons in the metal out in need of very high voltage electricity. Because not enough to voltage that we use 220 volt, fluorescent lamp starter, grafted on to stop a while to produce electricity in a high electric voltage.

Fluorescent light starter components

High-voltage electric is cutt off from current to flow. Therefore, when Fluorescent Lamps, electrical connecting repeatedly cut, so look at our eyes blink, while starter is generally light but, when the lights go out starter that is lit exactly goes on.

Sunday, August 24, 2014

12 Volt DC Fluorescent Lamp Wiring diagram Schematic

A number of people have been unable to find the transformer needed for the Black Light project, so I looked around to see if I could find a fluorescent lamp driver that does not require any special components. I finally found one in Electronics Now. Here it is. It uses a normal 120 to 6V stepdown transformer in reverse to step 12V to about 350V to drive a lamp without the need to warm the filaments.

Parts:

C1 100uf 25V Electrolytic Capacitor
C2,C3 0.01uf 25V Ceramic Disc Capacitor
C4 0.01uf 1KV Ceramic Disc Capacitor
R1 1K 1/4W Resistor
R2 2.7K 1/4W Resistor
Q1 IRF510 MOSFET
U1 TLC555 Timer IC
T1 6V 300mA Transformer
LAMP 4W Fluorescent Lamp
MISC Board, Wire, Heatsink For Q1

Notes:

Q1 must be installed on a heat sink.
A 240V to 10V transformer will work better then the one in the parts list. The problem is that they are hard to find.
This schema can give a nasty (but not too dangerous) shock. Be careful around the output leads.

Thursday, August 7, 2014

12V Fluorescent Lamp Circuit

This is 12V Fluorescent lamp schema.This is useful schema for vehicle owners.Because they can use this schema for their car or van.When you check this schema be careful because this releases about 350V.